Regenerative Blowers - RENOVA
RENOVA Regenerative blowers produced by MADAN TECHNOLOGIES, are the ideal solution for moving large volumes of air at lower pressures or vacuums, a regenerative blower, it can be the most cost effective method for producing pressure or vacuum. Regenerative blowers are also called side channel blowers or ring compressors, terms that refer more to their physical construction. The more common name regenerative comes from their basic operating principle. RENOVA blower are made of aluminum casting. There is no need for lubrication since there is no connection between static and rotating parts and is built for a long operation. These blowers have two air openings, one air intake, and other air outlet. The air intake door has suction, and the air outlet has compression, and the blower can be used to compress air to the exit line. In order to maintain the integrity of the blowers, foreign objects entering the air must be prevented. Therefore, it is recommended to install an air filter that needs to be cleaned. In the use of pressure a filter is chosen to clean the air from the environment. The compressed air cools the blower, and removes the heat so it is important to allow the blower to flow air for cooling. In proper operation, this must be taken into account when the outgoing air is suspended and the air flow is reduced so that the blower does not cool down.